Main office
c/ Masía de monte Alcedo, parcela 4.3
Pol. Ind. Masia Baló, 46394
Ribarroja del Turia (Valencia)
Spain

Coordinates
(N) 39º 28’ 59.4654’’ = 39.483185º
(O) 0º 35’ 8.4258’’ = -0.585674

Contact phone
961 340 544

Fax
961 667 821

Contact email
marketing@thu.es

Mobile Logo
Home  /    /  Linear slats, Metallic ceilings  /  LAMA ITALIA XL
LAMA ITALIA XL
LAMA ITALIA XL - Image 2
LAMA ITALIA XL - Image 3
LAMA ITALIA XL - Image 4

LAMA ITALIA XL

The Italia XL linear slat brings a contemporary look and improves the acoustic comfort of interior spaces. It is a metal false ceiling made up of linear slats 30, 40 or 50 mm wide and 65 mm high. THU’s Italia XL linear slat is a special solution that is simple to install, decorative and functional. It consists of linear elements suspended from a concealed support structure, with the option of a carrier with safety tabs, and each element can be removed individually. The linear slats of THU’s Italia XL system are manufactured plain and perforated, in a range of finishes, and a variety of complementary elements and accessories are available.

Download the documentation

Categories: , Tag:

If you wish to download our datasheets, assembly manuals, declarations of performance and BIM files:

Go to our downloads area

Description

Features and performance

Reaction to fire

Euroclass A1 according to standard UNE-EN 13501-1-2019

Colours and dimensions

Dimensions

High-performance linear metal ceiling system consisting of vertical baffles with a rectangular cross-section and 90º edges, suspended in parallel from a concealed support structure with an optional safety tab depending on the model. Each element can be removed individually. The width of the baffles and the spacing between them vary depending on the model.

Finishes

Installation and cleaning

  • The elements of any THU system must be stored in dry, well-ventilated areas, away from heat sources and protected from direct sunlight and rain.
  • THU products are tested for indoor use, without direct exposure to the weather or to the temperature and humidity cycles of outdoor conditions.
  • Installation shall begin only once the building (or the relevant area of it) is wind- and watertight and all traces of moisture have disappeared; ambient conditions must also be suitable in terms of temperature (15 to 25 ºC) and humidity (35 to 70%).
  • Once installed, no element should show any remains of packaging, protective film, surface marks or handling stains.

Related products