Main office
c/ Masía de monte Alcedo, parcela 4.3
Pol. Ind. Masia Baló, 46394
Ribarroja del Turia (Valencia)
Spain

Coordinates
(N) 39º 28’ 59.4654’’ = 39.483185º
(O) 0º 35’ 8.4258’’ = -0.585674

Contact phone
961 340 544

Fax
961 667 821

Contact email
marketing@thu.es

Home  /    /  Linear slats, Metallic ceilings  /  SICILIA CLIP-IN VL STRIP

SICILIA CLIP-IN VL STRIP

THU strip, 300 mm wide and of variable length as required (maximum length 2.5 metres), with all four sides at 90º and accessible at any point. The Sicilia Clip-In Variable Length ceiling is installed on a concealed two-way grid made up of triangular profiles, hangers and/or cross-connectors (depending on the installation system), and finished at the perimeter on 24 mm angles or other solutions such as perimeter bands. Each longitudinal element is clipped onto the triangular profile by means of rectangular embossings on its sides. The strips cover the entire ceiling surface, so the profiles holding them remain concealed.

Download the documentation

Categories: , Tag:

If you wish to download our datasheets, assembly manuals, declarations of performance and BIM files:

Go to our downloads area

Description

Features and performance

Reaction to fire

Euroclass A1 according to standard UNE-EN 13501-1-2019

Colours and dimensions

Dimensions

300 mm wide and of variable length as required (maximum length 2.5 metres), accessible at any point and with square edges on all four sides. The Sicilia ceiling is installed on a concealed two-way grid made up of triangular retaining profiles, hangers and cross-connectors (depending on the installation system), and finished at the perimeter with 24 mm angles or perimeter bands.

Finishes

Other colours: price on request

Installation and cleaning

  • The elements of any THU system must be stored in dry, well-ventilated areas, away from heat sources and protected from direct sunlight and rain.
  • THU products are tested for indoor use, without direct exposure to the weather or to the temperature and humidity cycles of outdoor conditions.
  • Installation shall begin only once the building (or the relevant area of it) is wind- and watertight, all traces of moisture have disappeared and ambient conditions are suitable in terms of temperature (15 to 25 ºC) and humidity (35 to 70%).
  • Once installed, no element should show any remains of packaging, protective film, surface marks or handling stains.