Main office
c/ Masía de monte Alcedo, parcela 4.3
Pol. Ind. Masia Baló, 46394
Ribarroja del Turia (Valencia)
Spain

Coordinates
(N) 39º 28’ 59.4654’’ = 39.483185º
(O) 0º 35’ 8.4258’’ = -0.585674

Contact phone
961 340 544

Fax
961 667 821

Contact email
marketing@thu.es

Home  /    /  Linear slats, Metallic ceilings  /  VENECIA STRIP

VENECIA STRIP

Strips made from aluminium sheet 0.45 mm (Venecia 200) or 0.55 mm (Venecia 300) thick plus coatings, formed by cold rolling. The strips are fixed to the carrier by means of tabs that are opened and closed by hand. Plastic clips are also used to fix the strips to each other. The range of finishes is limited to plain pre-painted strips; the Venecia 300 strip can be perforated.


Download the documentation


Categories: , Tag:

If you wish to download our datasheets, assembly manuals, declarations of performance and BIM files:

Go to our downloads area

Description

Features and performance

Reaction to fire

Euroclass A1 according to standard UNE-EN 13501-1:2019

Colours and dimensions

Dimensions

Metal suspended ceiling made of pre-painted aluminium strips, 200 or 300 mm wide, inserted into the tabs of carriers with a punching pitch of 200 (Venecia 200) or 100 (Venecia 300) and suspended from the slab above by means of a threaded rod system.

Finishes
MURANO LAMA PERFORACIONES
thu-colores-venecia

Installation and cleaning

  • The strips must be stored in dry, well-ventilated areas, away from heat sources and protected from direct sunlight and rain.
  • THU Perfil ceilings are installed in the final phase of construction, that is, once all the enclosures have been completed and the building services
    are already in place.
  • The room where the ceiling is to be installed must be clean and free of obstacles that could hinder the installation process.
  • Install the ceiling under suitable ambient conditions of temperature (15 to 25 ºC) and humidity (35 to 75%).
  • Clean only with soapy water (neutral soap) and rinse.
  • DO NOT use solvents or degreasers.
  • Dry surfaces with excess water using a cloth, taking care not to scratch the surface of the product.