How to install a linear slat false ceiling

Today we would like to share with you a video tutorial on how to install a linear slat false ceiling, which is very useful for false ceiling installers and for anyone who wants an in-depth understanding of the installation process for this type of technical ceiling.

To show you the procedure, we have chosen the Lama Venecia model, and you can consult the product data sheet via the link. Here is the step-by-step explanation:

Step 1: Calculating the surface area

In this first step, the total surface area where the false ceiling is to be installed is calculated. To do this, the total length and total width are measured in order to determine the perimeter and the material required.

Step 2: Choosing the direction in which the slats are laid

We recommend always choosing the direction that requires the shortest slat length. The slats do not require any upper installation profile as long as they do not exceed 2.5 m in length, as they simply rest on their short sides.

Step 3: Calculating slat length

1 cm must be deducted from the length of each slat on each side so that they have adequate support and can be easily removed. The slats can be adjusted on site by cutting them with an angle grinder fitted with a thin metal-cutting disc.

Step 4: Determining the height between the ceiling and the slab

Calculate the distance between the false ceiling and the slab (plenum) where the slats are to be installed. Once this has been determined and the line has been properly marked, the perimeter angle known as “edge trim” is installed in the same colour as the slats, screwing it to the wall with suitable screws at a spacing of approx. 40 cm between fixings.

Where the profiles meet at the corners, they can be mitred according to the angle or simply butted square.

Step 5: Installing the slats:

The slats are laid in order from one end of the surface to be covered to the other, all in the same direction, starting with the first slat, whose straight 90º rib rests on the starting edge of the perimeter profile.

As installation progresses, we recommend fitting 2 types of plastic clips with different functions: slat-to-slat clips, which fix the slats to each other so that the joints between them are as perfect as possible, and slat-to-perimeter clips, which keep the slats fixed to the perimeter profiles and prevent possible movement.

Step 6: Cutting the last slat

If necessary, the last slat is cut lengthwise to adjust its width to the surface, using the same tool as for cutting the perimeter profile.

Here is the video tutorial on how to install a linear slat false ceiling. If you have any queries or questions, please do not hesitate to contact us on 961 340 544 or at info@thu.es.

This article is for information purposes only and is based on the information available at the date of publication. Due to the constant evolution of technology, regulations and technical specifications, some of its content may become outdated or change over time. In the event of any discrepancy, the manufacturer’s or supplier’s current official technical documentation shall always prevail. For any queries, or if you need advice applied to a specific project, please do not hesitate to contact our team.